These commercial cans replace incandescent, CFL, or HID fixtures with a wide range of aperture sizes. The simple installation allows the fixture to be installed from below the ceiling without removing the existing fixture.
Note: This product is being discontinued and replaced with USL-CSP2C. Limited stock is available.
These LED round panels are an ideal replacement for commercial and residential downlighting applications. The round panel range is sized to be inserted directly into standard light cut holes. By having LED chips mounted in the edge of each panel greater beam angles can be achieved than traditional. Each panel is supplied with a driver connected through armored cables reducing the fire hazard risk, especially important in high voltage commercial applications.
This fixture features recessed installation, which is ideal for both new construction applications or retrofitting existing fluorescent troffer fixtures. Available in 2x2, 2x4, and 1x4, this fixture is suitable for use in office spaces, retail stores, education, government, and healthcare facilities.
This edge-lit panel is CCT selectable at 3000K, 3500K, 4000K, and 5000K. It is controlled by a wall switch or a 2.4 GHz hand-held remote. The fixture utilizes a PMMA LGP to prevent yellowing over time.
This volumetric troffer retrofit kit easily converts 2x2 and 2x4 fluorescent troffers to the most current LED technology. It comes completely assembled as a lensed kit, requiring only one minute to install while utilizing the existing fixture housing for minimal waste. The kit provides all the components needed to perform the change-out quickly and efficiently, allowing for system upgrades without disturbing the ceiling.
This low bay fixture comes with 5-foot cable attached. It features an integrated heat sink for thermal management. Suitable for locations such as parking ramps, workshops, warehouses, or public transportation platforms.
This slim batten light can replace T8 and T12 fluorescent fixtures. It can be surface mounted or ceiling suspended. Multiple segments can be hooked together (up to 200W) to create longer lengths using either a cable or seamless connector.
This T5 replacement fixture contains an integrated heat sink for improved thermal conductivity. Multiple segments can be hooked together (up to 200W) to create longer lengths using either a cable or seamless connector.
This drum light can be mounted as a pendant, recessed, or surface mount. The standard model is available in down light only, but an up/down model is available to remove the dark spot in the ceiling above large suspended fixtures.
These emergency exit lights are available as an exit sign, “frog eye” lights, or a combination. These mimic the aesthetic of traditional emergency exit signage, but are illuminated with LED and are available with green or red text.
This square light is ideal for retrofitting surface mount fixtures in a wide range of diameters. The light engine fits fixtures with diameters of anywhere from 6 to 16 inches with a depth of as little as 2 inches. This versatility helps reduce the amount of inventory needed.
The innovative separable design of junction box and housing makes it more flexible, with 75 degree beam angle, the 4, 6, 8, or 10 inch split commercial down light can fulfill a wide range of lighting needs. Easy-fit installation comes from adjustable spring-action housing clips. It is designed and engineered for recessed applications, which is suitable for commercial and public places and elegantly decorates the ambiance, such as shopping mall, hospital, airport, hotel lobby, etc.
The 2X4FT LED troffer offers a traditional yet modern design with the latest lighting technology. Transparent optics engineered specifically for LED sources are integrated with minimalist design and architectural materials to create a broad range of solutions with superior optical and energy performance. High performing optics allows for maximum energy savings and optimal illumination in a ultra-minimalistic shallow recessed fixture, provides a unique translucent appearance without sacrificing performance. Long-life LED system coupled with electrical driver to deliver optimal performance. LEDs are available in 3000K, 3500K, 4000K and 5000k. Standard drivers are 0-10 volt continuous dimming that work with 0-10V control/dimmer.
This light-weight, compact high bay fixture is ideally suited for large area applications such as workshops, warehouses, parking lots, sports venues and dock areas. Its unique patented sunflower heat sink allows for advanced thermal dissipation. And its rugged die-cast aluminum housing ensures its durability.
This second-generation linear strip fixture is suitable for a wide range of applications such as storage and utility areas, cove lighting, display cases, and task or general lighting. It can be surface mounted, pendant mounted, or attached to t-bars in a grid ceiling.
This fixture is water-proof, dust-proof, bug-proof, and pressure-proof. Available as a linkable model, up to 600 W can be connected in series. It is suitable for humid environments, making it ideal in underground parking lots, metro stations, airports, harbors, factories, outdoor playgrounds, indoor stadiums, supermarkets, shopping malls, etc.
This modular mini light bar has a wide variety of adapters and connectors, making the installation highly customizable. Up to 16 feet (5 meters) can be connected to one power supply. The remote driver reduces heat and lengths the lifespan of the product.
This retrofit kit can be used to upgrade linear fixtures to LED. It mounts to the fixture, eliminating the need for lamp sockets. The light module features an aluminum body, which functions as a heat sink and provides a mounting option.
This grow light contains 8 modules which can be configured in a variety of shapes. Each module features a built-in heat sink to eliminate the need for fans. The linear shape allows it to illuminate large areas while minimizing the blocked sunlight in greenhouse applications.
This downlight panel utilizes an aluminum frame, and has a 0.51” ultra-thin side-emitting design and high transmittance light guide plate. It provides uniform light distribution with color temperature consistency. The fixture is IC rated and no recessed can is required saving time and installation cost. Suitable as a retrofit or new install.
This troffer features a flat diffuser down the middle of the fixture, creating indirect light and reducing glare. It is ideal for replacing fluorescent troffers in offices, retail, and educational locations.
This flat panel features a color-selectable model and a powerselectable model. Both of these configurations are set via a dip switch. The slim fixture fits in a wide variety of applications–anywhere that troffers would traditionally go. Available in 1x4 in addition to standard 2x2 and 2x4.
The volumetric design of this center basket troffer provides a uniform light distribution. As a retrofit instead of a full fixture, this product easily installs to replace an old fixture without needing to disassemble or remove the existing housing.
Note: This product is being discontinued and replaced with USL-HB31D. Limited stock of USL-HB21D remains in the warehouse. Contact us for availability.
The US Luminaire compact high bay series is designed with a compact lamp body with smooth lines, creating an attractive appearance. The die-cast aluminum housing includes a professional cooling channel for improved cooling performance. Additionally, the luminaire utilizes toughened glass to improve impact resistance. This product is designed to handle indoor and outdoor applications with an IP65 rating. Ideally suitable for large workshops, gyms, stations, warehouses and covered parking lots, this fixture replaces traditional HID high bay lighting.
Suitable for area lighting, garage lighting, warehouse lighting, or anywhere with high bays, this fixture features an Edison socket for simple retrofitting without needing to replace the entire fixture.
This linear fixture has a quick-open feature to allow easy access to the driver. Multiple fixtures can be connected together. It is available with side reflectors. Select models have a switch to determine CCT (3500K/4000K/5000K).
The US Luminaire sleek linear stairwell fixture series offers emergency backup and motion sensing options. Multiple mounting options include ceiling, wall, and chain or cable wire suspension. While these fixtures are ideal for stairwells, they also work well in parking garages, warehouses, and school and supermarket corridors.
These linear fixtures have primarily up light when used with the lens cover. These fixtures are better suited for accent lighting rather than as a primary light source. A pop of color makes these fixtures suitable in environments with children such as schools and children’s hospitals.
This fixture is compatible with track lighting; can be surface mounted; or can be pendant mounted via chain, cord, or rod. It can work on normal mains and automatically switch to emergency supply in the event of a power failure. This is done by self-contained batteries or by using two independent emergency lighting circuits in the trunking.
These flush ceiling-mount fixtures feature an integrated LED module, eliminating the need to replace light bulbs. A variety of finishes and sizes are available. An opaque acrylic diffuser and metal finishes make these fixtures suitable in residential, apartment, and hotel applications.
This wall sconce is a half circle that only extends 3 5/8” from the wall. The integrated LED array gives off lumens roughly equivalent to a 60W incandescent bulb, making it suitable as ambient lighting or decorative lighting in locations such as offices, lobbies, hotels, and restaurants.
This under cabinet light is available in lengths from 8 inches to 32 inches. It features a micro-switch to select the color temperature. The slim 1” profile keeps the fixture out of sight. The lens extends the length of the fixture to evenly distribute the light. The module design and connection options gives flexibility in installation.
These exit signs are edge-lit. They can be recessed mounted or they can be surface mounted--either back or flag style. Installation hardware includes adhesive chevron arrows and templates for their installation. The 4.8V NiCd batter provides a minimum of 90 minutes illumination.