This sleek linear fixture features a recessed lens surrounded by a colored baffle, which can be custom-colored. Available in 2-foot and 4-foot lengths, it can be connected together into multiple shapes. The fixture can be surface mounted, or suspended.
This LED linear light has a sleek aluminum profile and can be installed suspended or ceiling mounted. The uniform light distribution prevents individual light spots from being seen. This architectural fixture is suitable for hotels, conference rooms, offices, and hospitals.
US Luminaire’s circular post light is a sleek solution for lighting pathways, parking areas, parks, and other outdoor spaces. The aluminum body features an integrated heatsink for an extended lifespan.
The US Luminaire’s full cut-off wall pack was designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight while being extremely durable. Ideal applications include building exteriors, entryways and walkways, parking lots and security lighting.
This wall pack features a rotatable design to direct the light. The higher power options have two segments which are independently movable to create the perfect combination of light output both down and out.
This fixture can be used to make decorative grid or linear light patterns. Fixtures are available in a wide range of CCT options in both 2-beam and 4-beam options. RGB models are available with 4 beams.
This omni-directional corn bulb features an isolated driver and integrated heat sink for thermal management. The bulb has flame retardant materials and built-in overheat protection in the power supply. If either the lamp body or the driver reaches the thermal cutoff, power is reduced to 70%. If both are triggered, power output is 50%. When it returns to normal, output returns to 100%.
Note: This product is being discontinued and replaced with USL-CSP2C. Limited stock is available.
These LED round panels are an ideal replacement for commercial and residential downlighting applications. The round panel range is sized to be inserted directly into standard light cut holes. By having LED chips mounted in the edge of each panel greater beam angles can be achieved than traditional. Each panel is supplied with a driver connected through armored cables reducing the fire hazard risk, especially important in high voltage commercial applications.
This troffer features a flat diffuser down the middle of the fixture, creating indirect light and reducing glare. It is ideal for replacing fluorescent troffers in offices, retail, and educational locations.
This edge-lit panel is CCT selectable at 3000K, 3500K, 4000K, and 5000K. It is controlled by a wall switch or a 2.4 GHz hand-held remote. The fixture utilizes a PMMA LGP to prevent yellowing over time.
This volumetric troffer retrofit kit easily converts 2x2 and 2x4 fluorescent troffers to the most current LED technology. It comes completely assembled as a lensed kit, requiring only one minute to install while utilizing the existing fixture housing for minimal waste. The kit provides all the components needed to perform the change-out quickly and efficiently, allowing for system upgrades without disturbing the ceiling.
This low bay fixture comes with 5-foot cable attached. It features an integrated heat sink for thermal management. Suitable for locations such as parking ramps, workshops, warehouses, or public transportation platforms.
The illumination surface on this pendant light is translucent when powered off. When on, it provides up and down light to produce low glare. 320W can be connected with 120V source; 640W can be connected with 227V.
This LED linear light has a sleek profile and can be installed suspended or wall-mounted. The uniform light distribution prevents individual light spots from being seen. This architectural fixture is suitable for hotels, conference rooms, offices, and hospitals.
Shoebox lights are ideal for illuminating roads, industrial areas, sidewalks, parking lots, or other large areas. These LED fixtures replace old HID pole lights, with this series being slimmer than older alternatives.
The US Luminaire classic wall pack series has been designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight and extremely durable.
This full-cutoff wall pack is ideal for use in perimeter and security lighting, walkways, and entrances while preventing unwanted light from going elsewhere. The fixture is suitable for applications requiring 3G testing prescribed by ANSI C136.31. Select models are dimmable. Please see specification table for details.
This mini wall pack series is ideally suited for security, entry ways, stairways, storage and perimeter areas, as well as residential exteriors. Its durable design combined with the 5-year warranty make this fixture an obvious choice.
Powerful, yet compact, this slim wall washer is an ideal solution to illuminating billboards and highlighting buildings. It can illuminate at a distance up to 13 feet away. Available in 20” and 40” sections and can be daisy-chained together up to 100W (16-23 ft).
These commercial cans replace incandescent, CFL, or HID fixtures with a wide range of aperture sizes. The simple installation allows the fixture to be installed from below the ceiling without removing the existing fixture.
This fixture features recessed installation, which is ideal for both new construction applications or retrofitting existing fluorescent troffer fixtures. Available in 2x2, 2x4, and 1x4, this fixture is suitable for use in office spaces, retail stores, education, government, and healthcare facilities.
This light-weight, compact high bay fixture is ideally suited for large area applications such as workshops, warehouses, parking lots, sports venues and dock areas. Its unique patented sunflower heat sink allows for advanced thermal dissipation. And its rugged die-cast aluminum housing ensures its durability.
This second-generation linear strip fixture is suitable for a wide range of applications such as storage and utility areas, cove lighting, display cases, and task or general lighting. It can be surface mounted, pendant mounted, or attached to t-bars in a grid ceiling.
This luminaire is integrated onto a T-bar so it can replace sections of the grid in a suspended ceiling to provide integrated light. Multiple segments can be placed adjacent to create a seamless light flow. It can replace any 2-foot or 4-foot section of grid, allowing a highly flexible lighting layout.
US Luminaire’s Everett series LED pendants are sure to impress. Utilizing an aluminum frame, 0.3” solid acrylic lens and both down light and up light with a 360-degree spread, these provide a sleek option for architectural design. The Everett series is designed to suspend from the ceiling and multiple fixtures can be interconnected as a long linear fixture. The Everett series is ideal for offices, reception areas, boardrooms, and anywhere else elegance is desired. Standard colors are silver and white. Additional colors are black and bronze.
The US Luminaire semi cut-off wall wall pack series has been designed and built with high performance, efficiency and cost effectiveness in mind. The LEDs are housed in a sealed compartment separate from the drivers to keep them cool. A bubble level is built in and a gasket is included to ensure proper and simple installation. The unit is lightweight and extremely durable.
This slim wall pack has an adjustable tilt. It can be a full cutoff wall pack with only down light, or it can be angled to direct the light where needed. Suitable for security and illuminating walkways and entrances.
Providing color both as up light and down light, the Up Down RGB wall washer can make any building stand out. This product adopts the latest LED technology with high lumen efficiency combined with an IP65 rating. The product provides excellent light distribution and can add a pop of color to a business.
The innovative separable design of junction box and housing makes it more flexible, with 75 degree beam angle, the 4, 6, 8, or 10 inch split commercial down light can fulfill a wide range of lighting needs. Easy-fit installation comes from adjustable spring-action housing clips. It is designed and engineered for recessed applications, which is suitable for commercial and public places and elegantly decorates the ambiance, such as shopping mall, hospital, airport, hotel lobby, etc.
The 2X4FT LED troffer offers a traditional yet modern design with the latest lighting technology. Transparent optics engineered specifically for LED sources are integrated with minimalist design and architectural materials to create a broad range of solutions with superior optical and energy performance. High performing optics allows for maximum energy savings and optimal illumination in a ultra-minimalistic shallow recessed fixture, provides a unique translucent appearance without sacrificing performance. Long-life LED system coupled with electrical driver to deliver optimal performance. LEDs are available in 3000K, 3500K, 4000K and 5000k. Standard drivers are 0-10 volt continuous dimming that work with 0-10V control/dimmer.
This flat panel features a color-selectable model and a powerselectable model. Both of these configurations are set via a dip switch. The slim fixture fits in a wide variety of applications–anywhere that troffers would traditionally go. Available in 1x4 in addition to standard 2x2 and 2x4.
The volumetric design of this center basket troffer provides a uniform light distribution. As a retrofit instead of a full fixture, this product easily installs to replace an old fixture without needing to disassemble or remove the existing housing.
Note: This product is being discontinued and replaced with USL-HB31D. Limited stock of USL-HB21D remains in the warehouse. Contact us for availability.
The US Luminaire compact high bay series is designed with a compact lamp body with smooth lines, creating an attractive appearance. The die-cast aluminum housing includes a professional cooling channel for improved cooling performance. Additionally, the luminaire utilizes toughened glass to improve impact resistance. This product is designed to handle indoor and outdoor applications with an IP65 rating. Ideally suitable for large workshops, gyms, stations, warehouses and covered parking lots, this fixture replaces traditional HID high bay lighting.
Suitable for area lighting, garage lighting, warehouse lighting, or anywhere with high bays, this fixture features an Edison socket for simple retrofitting without needing to replace the entire fixture.